ART · E90
90° Horizontal Elbow
Horizontal elbow for a 90 degree change of direction.
Photos & drawings
Description
Turns an ART tray run through 90° in the horizontal plane. Rail height and width match the ART straights, and it joins them with standard splice plates.
On covered runs, add the matching 90° elbow cover.
ART50System and height: ART system, 50 mm height
System letters, then the height in millimetres.
Published item codes
| Part number | Height (mm) | Width (mm) | Thickness (mm) | Finish | Weight (kg) | Enquiry |
|---|---|---|---|---|---|---|
| ART50-E90-50-1.5-R30-A4 | 50 | 50 | 1.5 | SS316L | 4.09 | |
| ART50-E90-50-1.5-R30-G | 50 | 50 | 1.5 | Hot-Dip Galvanized | 4.04 | |
| ART50-E90-50-2-R30-A4 | 50 | 50 | 2 | SS316L | 5.46 | |
| ART50-E90-50-2-R30-G | 50 | 50 | 2 | Hot-Dip Galvanized | 5.39 | |
| ART50-E90-100-1.5-R30-A4 | 50 | 100 | 1.5 | SS316L | 4.82 | |
| ART50-E90-100-1.5-R30-G | 50 | 100 | 1.5 | Hot-Dip Galvanized | 4.76 | |
| ART50-E90-100-2-R30-A4 | 50 | 100 | 2 | SS316L | 6.43 | |
| ART50-E90-100-2-R30-G | 50 | 100 | 2 | Hot-Dip Galvanized | 6.35 | |
| ART50-E90-125-1.5-R30-A4 | 50 | 125 | 1.5 | SS316L | 5.21 | |
| ART50-E90-125-1.5-R30-G | 50 | 125 | 1.5 | Hot-Dip Galvanized | 5.15 |
Not in the list?
Characteristics
| Model | ART50, ART75 |
|---|---|
| Thickness | 1.5 / 2 mm |
| Radius | 300 mm |
| Material | Stainless Steel 316L, Hot-Dip Galvanized |
| Finish | A4, G |
GA drawings & documents
| Document | Type | Applies to | Revision | Download |
|---|---|---|---|---|
| ART 90° Horizontal Elbow — GA Drawing | General arrangement (GA) | ART/E90 | — |
GA drawings and spec sheets are published per component and cover every width and length in the range. Project-specific GA sheets for a particular item code are issued against an enquiry reference.