Part number guide

AML100-ST-100-1.5-3-G is AML system, 100 mm height, Straight, width 100 mm, thickness 1.5 mm, length 3000 mm, Hot-Dip Galvanized. Look up this item →

1. System and heightSystem letters, then the height in millimetres.
   AML100AML125AML150
2. Item typeWhich item it is.
   Straights and covers

   STStraightLCStraight Lipped Cover

   Bends, tees and crosses

   E3030° ElbowE4545° ElbowE9090° ElbowTTeeCPCrossOR9090° Outside RiserIR9090° Inside RiserOR4545° Outside RiserIR4545° Inside RiserIR3030° Inside RiserOR3030° Outside Riser

   Fitting covers

   E30-LC30° Elbow Lipped CoverE45-LC45° Elbow Lipped CoverE90-LC90° Elbow Lipped CoverT-LCTee Lipped CoverCP-LCCross Lipped CoverOR90-LC90° Outside Riser Lipped CoverIR90-LC90° Inside Riser Lipped CoverOR45-LC45° Outside Riser Lipped CoverIR45-LC45° Inside Riser Lipped Cover

   Splice plates and clips

   HSPHorizontal Adjustable Splice PlateVSPVertical Adjustable Splice PlateESPExpansion Splice PlateSPStraight Splice PlateHDCAHold Down Clip (HDCA)HDCBHold Down Clip (HDCB)
3. WidthWidth in millimetres.
   100125150200300400450500600750800900100011001200
4. ThicknessMaterial thickness in millimetres.
   1.52
5. LengthLength in metres: 3 means 3,000 mm.

   3 = 3000 mm · always this for Straight

6. FinishThe finish. Always the last part of the code.

   G = Hot-Dip Galvanized · always this for Straight