ART · IR90-LC
90° Inside Riser Cover
Lipped cover for the 90 degree inside riser.
Photos & drawings
Description
Lipped cover for the inside 90° riser, providing continuous enclosure over the change of elevation.
Installed directly over the corresponding riser fitting; specify one cover per riser within the same system and model.
Published item codes
| Part number | Width (mm) | Thickness (mm) | Finish | Weight (kg) | Enquiry |
|---|---|---|---|---|---|
| ART-IR90-LC-50-1.5-R30-A4 | 50 | 1.5 | SS316L | 0.64 | |
| ART-IR90-LC-50-1.5-R30-G | 50 | 1.5 | Hot-Dip Galvanized | 0.63 | |
| ART-IR90-LC-50-2-R30-A4 | 50 | 2 | SS316L | 0.85 | |
| ART-IR90-LC-50-2-R30-G | 50 | 2 | Hot-Dip Galvanized | 0.84 | |
| ART-IR90-LC-75-1.5-R30-A4 | 75 | 1.5 | SS316L | 0.82 | |
| ART-IR90-LC-100-1.5-R30-A4 | 100 | 1.5 | SS316L | 1.01 | |
| ART-IR90-LC-100-1.5-R30-G | 100 | 1.5 | Hot-Dip Galvanized | 1.00 | |
| ART-IR90-LC-100-2-R30-A4 | 100 | 2 | SS316L | 1.35 | |
| ART-IR90-LC-100-2-R30-G | 100 | 2 | Hot-Dip Galvanized | 1.33 | |
| ART-IR90-LC-125-1.5-R30-A4 | 125 | 1.5 | SS316L | 1.20 |
Not in the list?
Characteristics
| Model | ART50 |
|---|---|
| Height | 50 mm |
| Thickness | 1.5 / 2 mm |
| Radius | 300 mm |
| Material | A4, Hot-Dip Galvanized |
| Finish | A4, G |
GA drawings & documents
| Document | Type | Applies to | Revision | Download |
|---|---|---|---|---|
| ART 90° Inside Riser Cover — GA Drawing | General arrangement (GA) | ART/IR90-LC | — |
GA drawings and spec sheets are published per component and cover every width and length in the range. Project-specific GA sheets for a particular item code are issued against an enquiry reference.